At Skoggl, we believe your ski & snowboard should keep up with you, not hold you back in the 1900s.
Most ski goggles are basic AF. They are the definition of "one and done." If a strap stretches out or your lens starts fogging, you, my friend, are stuck buying a whole new goggle.
That’s why we designed our goggles to be fully interchangeable, so you can just grab replacement parts whenever you need.
Here is is our guide on how to swap out your straps and magnetic lenses!
How to change your Magnetic Lens
Changing your tint for low light or bright sun takes less than 10 seconds.
Watch this video or follow the steps below:
- Hold your Skoggl goggles facing you and locate the bottom corner of the lens (left or right side).
- Gently pull the lens outward; the magnets will release.
- Line up the new magnetic lens with the corners of the frame, making sure it's the right way around.
- Place the magnetic lens over the frame. When you hear a click, it means the lens is securely locked into place.
- Always double-check that the lens is secure before skiing or snowboarding.
How to change your Strap
Match your kit or replace a worn-out band with these steps:
Watch this video or follow the steps below:
- Locate where the strap clips into each side of the goggle frame.
- Pinch the small release lever at the base of the strap connector and pull downward to detach.
- To attach a new strap, make sure the Skoggl logo is facing outward.
- Slide the connector into the tram lines on the frame and press upward until it clicks securely into place.
✅ Quick Safety Check
Before skiing or snowboarding, always:
- Make sure lenses are firmly clicked in.
- Ensure straps are securely attached and comfortable.
You’re ready to slay the slopes with a look that’s 100% you.
0 commentaire